The maintenance of glass cleaning machines is a very important task. During normal times, it is necessary to frequently investigate the transmission part, water circulation system, electrical system, and air circuit system of the machine. If an emergency situation occurs, it is necessary to immediately press the emergency stop button for inspection. The maintenance of the transmission part deserves special attention, which is to promptly follow the instructions in the manual for smooth maintenance to ensure the normal operation of the transmission system. The water circulation system is related to the quality of cleaning glass, so we advocate replacing the pure water next to the water tank every day.

　　Clean the water tank and filtration device every week. During the cleaning process sheet, it is possible to investigate the spray situation of the nozzle through the small hole on the water tank cover. If there is a blockage, it should be stopped immediately, and then the nozzle should be removed. After clearing and acknowledging that the nozzle is working properly, debugging and installation should be carried out. In addition to checking the water circulation system, it is also necessary to pay attention to the regular protection of the air duct system. In addition to regularly checking the operation of the fan, we usually need to clean the fan every other month. If the filter screen is removed, it is necessary to turn off the power in advance to avoid safety accidents.

      In normal wind path protection, it is necessary to pay attention to the cleaning of the fan room and strive to clean it every day to avoid excessive dust inhalation by the fan. The temperature of the washing solution in the water system of the glass cleaning machine is generally controlled between 40 ° C and 50 ° C, and the water at this temperature is the most suitable for cleaning the glass surface.