Glass cleaning machines are also glass processing equipment, and their use techniques also have special processes.

　   1, Turn on the main power supply (control cabinet);

　　2, After turning on the transmission switch, the transmission speed can be adjusted as needed;

　　3, Check whether the water tank is filled with water (whether the water suction roller is swollen;)

　　4, start water pump(console;)

　　5, Start the brush roller motor (console;)

　　6, Turn on the fan first, then the heating control;

　　7, Place the glass plate on the feed section;

　　8, Check the glass at the discharging section and remove it;

　　9, Turn off the brush roller motor;

　　10, Turn off the transfer roller motor;

　　11, Turn off the heating control switch first, then the fan;

　　12, Turn off the water pump.

13, Turn off the main power supply.